View SKY65132_4205096.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
SKY65132: WLAN Power Amplifier Module
Applications
* IEEE802.11 b/g WLAN * ISM band * WCS fixed wireless * Wireless access nodes
Description
Skyworks SKY65132 is a Microwave Monolithic Integrated Circuit (MMIC) Power Amplifier (PA) with superior output power, linearity, and efficiency. These features make the SKY65132 ideal for Wireless Local Area Network (WLAN) applications. The device is fabricated using Skyworks high reliability Indium Gallium Phosphide (InGaP) Heterojunction Bipolar Transistor (HBT) technology. The device is internally matched and mounted in a 20-pin, 6 x 6 mm Multi-Chip Module (MCM) Surface-Mounted Technology (SMT) package, which allows for a highly manufacturable low cost solution. The device package and pinout for the 20-pin MCM are shown in Figure 1. A block diagram of the SKY65132 is shown in Figure 2.
Features
* Single 3.3 V supply * Linear output power of +29 dBm for IEEE802.11b mask * Linear output power of +27 dBm for IEEE802.11g mask * High gain of 33 dB * Output power detector: 20 dB dynamic range * Superior gain flatness * Internal RF match and bias circuits * Small footprint, MCM (20-pin, 6 x 6 mm) Pb-free (MSL3, 250 C per JEDEC J-STD-020) SMT package Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances) compliant packaging.
RF_IN
18
GND
GND
GND GND GND VC_BIAS VREF1 VREF2
1
20
19
GND
17
16
VCC1 VCC_DET V_DET VCC2 VDET_CNTL VCC3
2
15
3
14
4
13
5
12
6
7
8
9
10
11
VREF3
GND
RF_OUT
GND
S414
Figure 1. SKY65132 Pinout - 20-Pin MCM (Top View)
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 1
DATA SHEET * SKY65132 WLAN PA
VCC1
VREF1, VREF2 VREF3
VC_BIAS
VCC3
VCC_DET
Active Bias
Detector
V_DET
RF_IN
Input Match Stage 1 PA
Inter-Stage Match
Stage 2 PA
VCC2
Inter-Stage Match
Output Match Stage 3 PA
RF_OUT
S413
Figure 2. SKY65132 Block Diagram
Technical Description
The SKY65132 PA contains all of the needed RF matching and DC biasing circuits. The device also provides an output power detector voltage. The SKY65132 is a three-stage, HBT InGaP device optimized for high linearity and power efficiency. These features make the device suitable for wideband digital applications, where PA linearity and power consumption are of critical importance (e.g., WLANs). The device has been characterized with the highest specified data rates for 802.11b (11 Mbps) and 802.11g (54 Mbps). Under these stringent test conditions, the device exhibits excellent spectral purity and power efficiency.
Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. For packaging details, refer to the Skyworks Application Note, Tape and Reel, document number 101568.
Electrical and Mechanical Specifications
Signal pin assignments and functional pin descriptions are described in Table 1. The absolute maximum ratings of the SKY65132 are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics are shown in Figures 3 through 10. Figure 11 provides a typical evaluation board schematic. The evaluation board assembly drawing is provided in Figure 12. The evaluation board layer detail is shown in Figure 13 and the layer detail physical characteristics in Figure 14. Package dimensions for the SKY65132 20-pin MCM are shown in Figure 15, and tape and reel dimensions are shown in Figure 16.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SKY65132 is rated to Moisture Sensitivity Level 3 (MSL3) at 250 C. It can be used for lead or lead-free soldering. For additional information, refer to Skyworks Application Note, PCB Design and SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752.
Electrostatic Discharge (ESD) Sensitivity
The SKY65132 is a static-sensitive electronic device. Do not operate or store near strong electrostatic fields. Take proper ESD precautions.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
2 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F
DATA SHEET * SKY65132 WLAN PA
Table 1. SKY65132 Signal Descriptions
Pin # 1 2 3 4 5 6 7 8 9 10 GND GND GND VC_BIAS VREF1 VREF2 VREF3 GND RF_OUT GND Name Ground Ground Ground Bias voltage Bias reference voltage 1 Bias referance voltage 2 Bias referance voltage 3 Ground RF output Ground Description Pin # 11 12 13 14 15 16 17 18 19 20 VCC3 VDET_CNTL VCC2 V_DET VCC_DET VCC1 GND RF_IN GND GND Name Description Stage 3 collector voltage Detector voltage control Stage 2 collector voltage Detector output signal Detector supply voltage Stage 1 collector voltage Ground RF input Ground Ground
Table 2. SKY65132 Absolute Maximum Ratings
Parameter RF output power Supply voltage POUT VC_BIAS, VREF1, VREF2, VREF3, VCC1, VCC2, VCC3, and VCC_DET ICC Symbol Minimum Maximum 30 5 Units dBm V
Supply current (ID + IBIAS) Power dissipation Case operating temperature Storage temperature Junction temperature
Note:
1100 4.0
mA W C C C
TC TST TJ
-40 -55
+85 +125 +150
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value.
Table 3. SKY65132 Recommended Operating Conditions
Parameter RF output power Supply voltage POUT VC_BIAS, VREF1, VREF2, VREF3, VCC1, VCC2, VCC3, and VCC_DET TC TST 3.0 Symbol Minimum Typical 27 3.3 Maximum 29 3.6 Units dBm V
Case operating temperature Storage temperature
-40 -55
+85 +125
C C
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 3
DATA SHEET * SKY65132 WLAN PA
Table 4. SKY65132 Electrical Specifications (VCC = 3.3 V, TC = +25 C, Test Frequency = 2.442 GHz unless otherwise noted)
Parameter Symbol Test Condition Min Typical Max Units
Using IEEE802.11b Complimentary Code Keying Input Signal, Data Rate = 11 Mbps Supply current Output power (Note 1) Power added efficiency (Note 2) Ramp-up/ramp-down (Note 3) ICC POUT PAE TS 950 29 20 <0.5 mA dBm % s
Using IEEE802.11g Orthogonal Frequency Division Multiplexing Input Signal, Data Rate = 54 Mbps Supply current Output power (Note 4) Power added efficiency (Note 2) Using Continuous Wave Input Signals Small signal gain Gain flatness over band Gain flatness over channel (16.25 MHz) Output power @ 1 dB compression Quiescent Current Noise Figure Power added efficiency P1dB IQ NF PAE @P1dB 24 G Continuous wave From 2.4 GHz to 2.5 GHz Over any 16.25 MHz within band Continuous wave 29.0 31.5 33.0 1.0 0.4 30 330 5.0 29 380 6.5 dB dB dB dBm mA dB % ICC POUT PAE 750 27 18 mA dBm %
Note 1: Defined as the maximum power level for which the IEEE802.11b transmit mask requirements are met. Note 2: Measured at the specified average output RF power and modulation type. Note 3: Ramp-up and ramp-down times are defined from the 10% to 90% power points. Note 4: Defined as the maximum power level for which the IEEE802.11g transmit mask requirements are met.
35.0 34.5
35
34.0 33.5
34
Gain (dB)
Gain (dB)
33.0 32.5
33
32.0 31.5 31.0
32 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
2.40
2.41
2.42
2.43
2.44
2.45
2.46
2.47
2.48
2.49
2.50
POUT (dBm)
Frequency (GHz)
Figure 3. Typical Gain vs POUT @ 2.442 GHz
Figure 4. Typical Gain vs Frequency Response
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
4 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F
DATA SHEET * SKY65132 WLAN PA
35
2.1 1.9 1,7 1.5
30
25
PAE (%)
VDET (V)
19 20 21 22 23 24 25 26 27 28 29 30
20 15
1.3 1.1
10
0.9
5 0
0.7 0.5 19 20 21 22 23 24 25 26 27 28 29 30 31
POUT (dBm)
POUT (dBm)
Figure 5. Power-Added Efficiency vs POUT @ 2.442 GHz
Figure 6. Detector Output Voltage vs POUT @ 2.442 GHz
6.0
8 7
5.5
6
Noise Figure (dBm)
5.0
5
4.5
EVM (%)
2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50
4 3 2
4.0
3.5
1
3.0
0 19 20 21 22 23 24 25 26
Frequency (GHz)
POUT (dBm)
Figure 7. Typical Noise Figure Performance vs Frequency
Figure 8. EVM vs POUT @ 2.442 GHz (802.11g, 64 Quadrature Amplitude Modulated, 54 Mbps Input Signal)
+10 0
+10 0
Relative Power (dB)
Relative Power (dB)
POUT = +29 dBm
-10 -20 -30 -40 -50 -60 2.411 2.417 2.423 2.430 2.436 2.442 2.448 2.454 2.461 2.467 2.473
-10 -20 -30
-40 -50 2.411
POUT = +27 dBm
2.417
2.423
2.430
2.436
2.442
2.448
2.454
2.461
2.467
2.473
Frequency (GHz)
Frequency (GHz)
Figure 9. Output Spectrum Response for 802.11b @ 2.442 GHz (11 Mbps Input Signal)
Figure 10. Output Spectrum Repsonse for 802.11g @ 2.442 GHz (64 Quadrature Amplitude Modulated, 54 Mbps Input Signal)
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 5
DATA SHEET * SKY65132 WLAN PA
20
19
18
17
C5 3300 pF
C15 10 F
Collector Voltage (Stage 1)
GND
RF_IN
GND
GND
1
GND GND
VCC1
16
L1 10 nH C6 3300 pF L2 10 nH
2
VCC_DET
15
Detector Supply Voltage
3 4
C11 10 F C1 3300 pF R1 300 C12 DNI C2 3300 pF
GND VC_BIAS
VDET
14
Detector Output
C7 8.2 pF
Bias Voltage
SKY65132
VCC2
13
C8 3300 pF C16 10 F
Collector Voltage (Stage 2)
Reference Voltage 1 Reference Voltage 2
5
VREF1
VDET_CNTL
12
VREF3
GND
VREF2
GND
R2 82 C13 DNI C3 3300 pF R3 82 C14 DNI C4 3300 pF
RF_OUT
6
VCC3
11
L3 0 C9 270 pF
R4 51
Reference Voltage 3
10
7
8
9
C10 3300 pF
C17 10 F
Collector Voltage (Stage 3)
Note: Evaluation Board material: four-layer Rogers 4003-12, er = 3.38
S415
Figure 10. SKY65132 Evaluation Board Schematic
C5 C11 C1 C12 C2
C15 C6 L1 C7 L2
J3
C13 C3
R1 L3
C8 C16 R4
J4
R2 C14 C4 R3 C10 C17
C9
J2
S588
Figure 11. Evaluation Board Assembly Drawing
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
6 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F
DATA SHEET * SKY65132 WLAN PA
Layer 1: Top Metal
Layer 2: Ground
Layer 3: Inner Traces
Layer 4: Ground
S590
Figure 12. Evaluation Board Layer Detail
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 7
DATA SHEET * SKY65132 WLAN PA
Cross Section
Name Thickness (mils) Material
L1 Lam1 L2_GND Lam2 L3_GND Lam3 L4 1.4 12 1.4 4 1.4 12 1.4 Cu, 1 oz. Rogers 4003-12 Cu, 1 oz FR4-4 Cu, 1 oz. FR4-12 Cu, 1 oz.
r
- 3.38 - 4.35 - 4.35 -
S573
Figure 13. Layer Detail Physical Characteristics
2.075 0.05 1.9 0.05 6.0 0.05 Pin 1 1.5 0.05
Metal Pad - Pin 1
2.5 0.05
6.0 0.05
2.75 0.05 1.5 0.05 0.5
1.9 0.05 Detail A
Top View
Bottom View
0.5 0.075 0.1
1.45 0.10
0.5 0.03
Side View
All dimensions are in millimeters
Metal Pad Edge
Detail A
S416
Figure 14. SKY65132 20-Pin MCM Package Dimensions
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
8 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F
DATA SHEET * SKY65132 WLAN PA
2.00 0.05 1.55 0.05 0.30 0.05 Pin #1 Indicator 8.00 4.00
B
1.75 0.10
5.50 0.05
A
6.30
A
5o Max. 1.70
B
1.50 Min. 6.30
B
Notes: 1. Carrier tape: black conductive polystyrene 2. Cover tape material: transparent conductive PSA 3. Cover tape size: 9.3 mm width 4. All dimensions are in millimeters
5o Max.
A
C1222
Figure 15. SKY65132 20-Pin MCM Tape and Reel Dimensions
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 9
12.00 0.30
DATA SHEET * SKY65132 WLAN PA
Ordering Information
Model Name SKY65132 WLAN Power Amplifier Module Manufacturing Part Number SKY65132-21 (Pb-free package) Evaluation Kit Part Number TW13-D121
Copyright (c) 2004, 2005, 2006 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
10 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F

▲Up To Search▲

Price & Availability of SKY65132

	To Download SKY65132 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .